Filter
Top Products
Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press STANDBY-ON (y on the remote
control).
➜ The system will switch to the last selected
source.
● Press SOURCE (CD, TUNER or AUX on
the remote control).
➜ The system will switch to the selected
source.
To switch the system to standby mode
● Press STANDBY-ON (y on the remote
control).
➜ The clock is displayed.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
Adjusting volume and sound
1
Press VOLUME
–
/
+
to increase or decrease
volume.
➜ Display shows the volume level and a
number from 0-32.
2 Press DSC repeatedly to
select the desired sound effect:
JAZZ / POP / CLASSIC /
ROCK.
3 Press DBB (on the remote control) to switch
bass enhancement on or off.
➜ Display shows: if the DBB is activated.
4 Press MUTE on the remote control to stop
sound play-back instantly.
➜ Playback will continue without sound and
the display shows MUTE .
● To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
VOLUME
DBB DSC
DBB
SOURCE VOLUME
-
+
BAND
O
P
E
N
/
C
L
O
S
E
PROG/ CLOCK
TUNING
STANDBY-ON
6