Filter
Top Products
Important!
– This set can only be operated after the
supplied DIN cable has been connected.
Tips
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
3
4
5
Connect the speaker wires of the right speaker and subwoofer to the
left speaker.
Connect the left speaker and the DVD player by using the supplied
DIN cable.
Connect the DVD player to your TV using the supplied composite video
cable.
Connect the VCR or cable/satellite box to the TV system. Connect AUX
IN 1 jacks to the AUDIO OUT jacks on the VCR or cable/satellite box.
2
Connect the supplied FM wire antenna.
Setting up the TV
Press SOURCE on the set (or DISC on the remote) to select disc source.
Turn on the TV and set it to the correct Video In channel.
1
2
A To listen to TV channels through this system, use the
audio cable (white/red, not supplied) to connect
AUX IN 1 (L/R) jacks to the corresponding AUDIO
OUT jacks on the TV set.
B To listen to TV channels through this system, use the
audio cable (white/red, not supplied) to connect
AUX IN 1 (L/R) jacks to the HEADPHONE jack on
the TV set.
● Before starting operation, press AUX1/2/TV on
the remote control to select “AUX 1” to activate
the input source.
● See the User Manual for other TV connection options.
AC Power Cord
8
6
6
Connect the AC power cord to the wall socket.
OUT
IN
MCD139B QSG_12_Eng 2007.5.11, 16:292