Filter
Top Products
4
3
Setting the clock
1
2
5
In the standby mode, press and hold CLOCK on the remote control.
➜ The clock digits for the hours continue to flash.
Adjust VOLUME -/+ (or press VOL +/- on the remote control) to set the hours.
Press CLOCK to confirm.
➜ The minute digits start flashing.
Adjust
VOLUME -/+ (or press VOL +/- on the remote control) to set the minutes.
Press
CLOCK to confirm the time.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Enjoy
C
Playing a disc
1
2
3
Press OPEN/CLOSEç to open the disc tray and load in a disc, then press the same
button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
Press ÉÅ to start playback.
To stop playback, press
9.
D
o
n
o
t
p
u
t
i
n
d
i
r
e
c
t
s
u
n
l
i
g
h
t
o
r
a
p
r
o
l
o
n
g
e
d
p
e
r
i
o
d
Notes for remote control:
– First select the source you wish to control by pressing one of the source select
keys on the remote control (for example FM, DISC).
– Then select the desired function (for example
É
, S ,
T).
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON
2
on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
iPod playback via the USB
port cannot be guaranteed.
MCB395 QSG_05-Eng 2008.5.23, 13:353