Filter
Top Products
18
English
3141 075 20031
Clock/Timer
Setting the clock
1 In standby, press CLOCK SET.
➜ The clock digits for the hours flash.
2 Tur n VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3 Press CLOCK SET again.
➜ The clock digits for the minutes flash.
4 Tur n VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5 Press CLOCK SET to confirm the time.
Note:
– The backlight for clock display is dim in standby.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In any mode, press TIMER ON•OFF for more
than 2 seconds.
2 Tur n VOLUME clockwise (or press SELECT
SOURCE) to select sound source.
3 Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
CD
or
TUNER
TUNER
is shown. The clock digits for the hours flash.
4 Tur n VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5 Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
6 Tur n VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
7 Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
● In standby or during playback, press
TIMER ON•OFF once.
➜ Display shows TIMER if activated, and
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of
time. The clock time needs to
be set first before the sleep
timer can be used.
● Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP and one of the sleep
time options in sequence: 60, 45, 30,15, SLEEP
OFF, 60... if you have selected a time. Once
SLEEP is activated, SLEEP ON scrolls across the
display at repeated intervals.
● To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY ON on the system
or remote control.
➜ SLEEP OFF scrolls across the display.