Filter
Top Products
19
English
MC138/17 English issue 1
Clock/Timer
Setting the timer
● The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first before
the timer can be used.
● If no button is pressed within 90 seconds during
timer setup, the system will exit timer setting
mode automatically.
1 In any mode, press TIMER for more than 2
seconds.
2 Press SOURCE (VOL 3 / 4 on the remote
control) to select sound source.
3 Press TIMER to confirm your desired source.
➜ The selected source
CD
or is
shown. The clock digits for the hours flash.
4 Press VOLUME 3 / 4 (VOL 3 / 4 on the
remote control) to set the hours.
5 Press TIMER again.
➜ The clock digits for the minutes flash.
6 Press VOLUME 3 / 4 (VOL 3 / 4 on the
remote control) to set the minutes.
7 Press TIMER to confirm the time.
➜ The timer is now set and actiated.
Note:
- Timer will not start if recording is in progress
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
Activating and deactivating
TIMER
● In standby or during playback, press
TIMER once.
➜ Display shows TIMER if activated, and
disappears if deactivated.
Setting the clock
1
Press and hold CLOCK button.
➜ The clock digits for the hours flash.
2 Press VOLUME 3 / 4 (VOL 3 / 4 on the
remote control) to set the hours.
3 Press CLOCK again.
➜ The clock digits for the minutes flash.
4 Press VOLUME 3 / 4 (VOL 3 / 4 on the
remote control) to set the minutes.
5 Press CLOCK to confirm the time.
Viewing the clock
To view the clock time in any source mode,
press CLOCK, the clock time will be displayed
for few seconds.
Note:
– If the clock has not been set, --:-- will be
displayed.