Philips M1BT Headphones User Manual


  Open as PDF
of 14
 
6 EN
4 Use your
headset
Connect the headset to a
Bluetooth device
1 Turn on your mobile phone/Bluetooth
device.
2 Press and hold the call/music button to
turn the headset on.
» TheblueLEDashes.
» The headset is reconnected to
the last connected mobile phone/
Bluetooth device automatically. If the
last one is not available, the headset
tries to reconnect to the second last
connected device.
Tip
• If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headset, you have to reconnect the headset and mobile
phone/Bluetooth device manually.
Manage your calls and music
Call/Music button
Task Operation Sound or LED
indicator
Turn the
headset on.
Press and
hold for 2
seconds.
•1 short beep
•3whiteashes:
battery low <
25%
•2whiteashes:
battery level <
50%
•1blueash:
battery level >
50%
Turn the
headset off.
Press and
hold for 4
seconds.
•1 long beep
•1 long white
ash
Play or
pause
music.
Press once. 1 short beep
Pick up/
hang up a
call.
Press once. 1 short beep
Reject an
incoming
call.
Press and
hold
1 short beep
Redial the
last number.
Press twice. 1 short beep
Switch
caller
during a
call.
Press twice 1 long beep
Volume/Track control button
Adjust volume. Turn up/
down
N/A
Skip forward. Press once 1 short
beep
Skip backward. Press twice 1 short
beep
Mute/unmute the
microphone in a call.
Press
once
2 short
beeps
Other headset indicator status
Headset status Indicator
The headset is connected
to a Bluetooth device, while
the headset in standby
mode or while you are
listening to music.
BlueLEDashes
for every 8
seconds.
The headset is ready for
pairing.
LEDashes
blue and white
alternately.
The headset is on but not
connected to a Bluetooth
device.
BlueLEDashes
quickly.
There is an incoming call. BlueLEDashes
once per second.
 previous next