12
3139 115 23842
English
Basic Connections (continued)
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV.
– Connect the DVD system directly
to the TV.
– Proceed to page 20 for setting up
the TV once you have completed
the connections.
Helpful Hints:
– To hear the TV channels through this DVD
system, use the audio cables (white/red - not
supplied) to connect AUX IN sockets to the
corresponding AUDIO OUT sockets on the TV
(not required if you are using Scart
connection).
– Scart (RGB) Video provides better picture
quality than Composite Video.
Step 5: Connecting to TV
L
R
Pb
Pr
Y
WIRELESS REAR
SPEAKER ANTENNA
VIDEO
AUDIO
OUT IN
TV
OR
OR
Option 1: Using Scart socket
● Use the supplied scart video cable (black)
to connect the DVD system’s SCART
socket to the corresponding Scart input
socket on the TV.
OR
Option 2: Using S-Video socket
● Use an S-video cable (not supplied) to
connect the DVD system’s S-VIDEO
socket to the S-Video input socket (or
labelled as Y/C or S-VHS) on the TV.
OR
Option 3: Using Composite Video
socket
● Use a composite video cable (yellow -
not supplied) to connect the DVD
system’s CVBS socket to the video input
socket (or labelled as A/V In, Video In,
Composite or Baseband) on the TV.
001-051-hts5x-01-Eng50 17/05/05, 1:18 PM12