Philips HTS3548W Home Theater System User Manual


  Open as PDF
of 2
 
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
SUBWOOFER
A Place the centre speaker above or close to the TV.
B Place the subwoofer on the floor, at least one metre
away from the TV.
C Place the front speakers at equal distances from the
TV.
D Place the rear speakers at the back or beside the
listening position.
E Place the wireless receiver at the back of the room
facing the wireless transmitter at the main unit.
B
Connect the main unit to TV
Pr
COAXIAL
CVBS
S-VIDEO
Pb
Y
VIDEO OUT
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
z
Connect a composite video cable (supplied) from the
CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note It is important to connect the main unit
directly to your TV.
2
Set up
C
Connect the wireless transmitter to
the main unit
WIRELESS
TRANSMITTER
WIRELESS
TRANSMITTER
z
Connect the wireless transmitter to the WIRELESS
TRANSMITTER socket at the rear of the main unit.
D
Connect the speakers and
subwoofer
WIRELESS
TRANSMITTER
A Connect the tall speakers, secure it with the supplied
screw using the Allen key.
B Connect the subwoofer, front and centre speakers
to the same coloured sockets at the rear of the main
unit.
C Connect the rear speakers to the same coloured
sockets at the bottom of the wireless receiver.
A
Finding the viewing channel
A Press 2 (STANDBY ON) on the main unit to turn
it on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
STANDBY-ON
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
° button) until
you see the Video In channel.
B
Select the display language on the
screen
A Press SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
English
Melayu
Русский
ไทย
B Press to select { OSD Language } and press .
C Use  keys to select a language option in the
menu and press OK to confirm.
D Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this Home Theatre
System. Refer to the user manual for more information.
E
Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
C
B
WIRELESS
TRANSMITTER
A Connect the FM antenna to the inner pin of the
FM 75 socket. Extend the wire for optimum
reception.
B Unfold the AM/MW loop antenna and fix the claw
into the slot. Push the tabs and insert the wires into
the AM/MW sockets.
C Connect the power cables from the main unit and
wireless receiver to the AC power outlet.
F
Connect audio output from TV
(optional)
To hear the TV audio through this home theatre system,
use a red and white audio cables (not supplied) to
connect the AUDIO IN-TV sockets on the main unit to
the AUDIO OUT sockets on your TV.
AUDIO
OUT
AUDIO IN
WIRELESS
TRANSMITTER
AUDIO
OUT
AUDIO OUT
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV programmes.
Main Unit (rear)
Television (rear)
Main Unit (rear)
Main Unit (rear)
FM antenna
AM/MW antenna
SETUP
Television
(rear)
Main Unit (rear)
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
WIreless
Receiver
(botom)
hts3548w_98qsg_eng2.indd 2hts3548w_98qsg_eng2.indd 2 2007-05-02 10:49:05 AM2007-05-02 10:49:05 AM
 previous