Filter
Top Products
3
Enjoy
DVD HOME THEATRE SYSTEM
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
What’s in the box?
Start disc playback
A Press OPEN/CLOSE ç to open the disc tray.
B Place a disc with the disc label facing up.
C Press OPEN/CLOSE ç to close the disc tray.
D Playback starts automatically.
E If the disc menu appears on the TV, use
keys or the numeric keypad to
select an option in the menu and press OK
to start playback.
z
To enjoy the powerful surround sound
from the speakers, press SURROUND
on the remote control to turn on the
multi-channel surround mode.
F Press
to stop playback.
Note When you press u button, playback
resumes from where it last stopped. To start
playback from the beginning, you have to press .
Playback other supported
devices
USB device
A Insert your USB device to the USB socket.
B Press DISC/USB to switch to ‘USB’ mode.
C Press u to start playback.
D To stop playback, press DISC/USB to switch to
‘DISC’ mode. You can unplug your USB device now.
USB
MP3 LINE-IN
Other portable audio player
A Use the supplied MP3 LINE-IN cable to connect the
headphone output socket on your portable audio
player to MP3 LINE-IN socket.
B Press PLAY on your portable audio player.
C Press MP3 LINE-IN to listen to the playback.
-
HTS3548W
User
Manual
1 centre, 2 front, 2 rear speakers
and subwoofer
FM wire
antenna
AM/MW
loop antenna
MP3 LINE-IN cable
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
Online
Go to www.philips.com/welcome
2007 C Koninklijke Philips N.V.
All rights reserved.
www.philips.com
Main Unit
Remote Control
and 2 batteries
Composite
video cable
Power cables
(2x)
Wireless receiver
Wireless transmitter
Troubleshooting
For more troubleshooting tips, see the user manual.
No picture.
• Press DISC/USB on the remote control.
• Check the connection to the TV and ensure the plugs are rmly in place.
No sound.
• Check the speaker connections and settings.
• Check the audio connections and press SOURCE to select the correct input source.
• Press SURROUND to turn on the multi-channel surround output.
If the indicator on the wireless transmitter blinks continuously for more than one minute.
• Press and hold CONNECT button on the wireless transmitter for 5 seconds. Turn on the wireless receiver.
Screws and Allen key
(for connecting the
tall speakers)
hts3548w_98qsg_eng2.indd 1hts3548w_98qsg_eng2.indd 1 2007-05-02 10:49:01 AM2007-05-02 10:49:01 AM