Filter
Top Products
18
Connect power cord
Warning
Risk of product damage! Ensure that the power •
supply voltage corresponds to the voltage printed
on the back or the underside of the Home Theater
System.
1 Connect the power cords from the
Home Theater System, wireless receiver
and other devices to the power outlets
when all the required connections are
done.
The wireless indicator on the wireless »
receiver light up. (Only applicable for
HTS3377W)
The Home Theater System is ready to »
be set up for use.
Note
For optimum wireless reception, ensure that the •
wireless receiver is not obstructed by any objects.
Connect portable media player
1 Connect a 3.5mm stereo audio cable (not
supplied) to the MP3 LINK jack on this
Home Theater System and the phone
jack on the portable media player (such as
MP3 player).
Note
To listen to the audio output from this connection, •
press AUDIO SOURCE repeatedly until ‘MP3 LINK’
is displayed on the display panel.
Connect USB device
1 Connect the USB device to USB jack
on this Home Theater System.
Note
This Home Theater System can only play/view MP3, •
WMA, DivX (Ultra) or JPEG À les that are stored on
such devices.
Press
• USB to access the content and play the À les.
MP3
EN
1_hts3270-3377-3377W_12_en3.indd 18 2009-03-30 11:43:41 AM