Philips HTS2500/98 Home Theater System User Manual


 
11
Change video settings
1 Press SETUP .
2 Select [Video Setup] , then press OK .
3 Select and adjust the following settings:
[TV System] : Selects a TV system that
is compatible with the TV.
[TV Display] : Selects a picture display
format to À t the TV screen.
[Screen Fit] : Selects a full screen
format that best À ts to the TV screen.
[Picture Settings] : Selects a
predeÀ ned color setting.
[Progressive] : Enables or disables
progressive scan mode.
4 Press OK to conÀ rm your choice.
Note
The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
Change general settings
1 Press SETUP .
2 Select [General Setup] , then press OK .
3 Select and adjust the following settings:
[OSD Language] : Selects the on-
screen display menu language.
[Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
[DivX(R) VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4 Press OK to conÀ rm your choice.
Note
Before you purchase DivX videos and play
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.
Change audio settings
1 Press SETUP .
2 Select [Audio Setup] , then press OK .
3 Select and adjust the following settings:
[Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
[Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
4 Press OK to conÀ rm your choice.
English
EN