Philips HTL2151F7 Speaker System User Manual


 
9
English
EN
Note
This product may not be compatible with certain types
of USB storage device.
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
Digital camera PTP protocols are not supported.
Do not remove the USB storage device while it is
being read.
DRM-protected music les (MP3, WMA) are not
supported.
Support a USB port: 5V , 500mA.
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
if:
no button is pressed for 15 minutes, and
no audio play from a connected device.
Apply factory settings
You can reset your SoundBar to the default
setting mode.
1 In mute mode, quickly press AUX twice.
» The factory settings is restored.
5 Wall mount
Note
Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that results
in accident, injury or damage. If you have any query,
contact Philips Consumer Care in your country.
Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
For information about how to wall mount your
SoundBar, see the quick start guide.
> 25mm
3 - 3.5mm