Philips HT53365 Stereo System User Manual


  Open as PDF
of 2
 
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
FRONT
RIGHT
SUBWOOFER
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
A Place the centre speaker above or close to the TV.
B Place the subwoofer on the floor, at least one metre
away from the TV.
C Place the front speakers at equal distances from the
TV.
D Place the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
AM/
MW
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
z
Use the supplied composite video cable to connect
the CVBS socket on the main unit to the VIDEO IN
socket on your TV.
Note If your TV supports HDMI, connect this unit
to your TV using HDMI connection for better picture
quality. See the accompanying user manual for more
information.
2
Set up
C
Connect the speakers and subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
A
Finding the viewing channel
A Press 2 (Standby-On) on the main unit to turn it
on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
° button) until
you see the Video In channel.
B
Select the display language on the
screen
A Press OPTIONS.
The { General Setup } appears.
B Press
.
Press OPTIONS to exit menu
General Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
DivX(R) VOD Code
Sleep
Español
English
Auto
Brazil Por
C Use  keys to select { OSD Language } and press
.
D Use  keys to select a language option in the
menu and press OK to confirm.
E Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theatre system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this Home Theatre
System. Refer to the user manual for more information.
D
Connect the radio antennas and
power cable
Keep the antennas away from the electronic devices to
prevent unwanted interference.
AM/
MW
D
C
B
A
A Connect the FM antenna (supplied) to the inner pin
of the FM 75 socket. (For some models, it has
been connected in the factory.) Extend the wire for
optimum reception.
B Unfold the AM/MW loop antenna (supplied) and fix
the claw into the slot.
C Press on the AM/MW tabs and insert the wires into
the sockets.
D Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this unit, use a red and
white audio cables (not supplied) to connect the AUDIO
IN-AUX sockets on the main unit to the AUDIO OUT
sockets on your TV.
AM/
MW
AUDIO
OUT
AUDIO IN
AUDIO
OUT
AUDIO OUT
Note When watching the TV programs, you can
press AUX (MP3 LINK) repeatedly on the remote
control until ‘AUX 1’ or ‘AUX 2’ is displayed to get the
sound output from the speakers.
Main Unit (rear)
Television (rear)
Main Unit (rear)
Main Unit (rear)
FM antenna
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTER
Main Unit (rear)
Main Unit (Front)
Standby button
TV (rear)
AM/MW antenna
hts3365_55-77-78_qsg_eng3_final82 2hts3365_55-77-78_qsg_eng3_final82 2 2008-02-13 11:07:50 AM2008-02-13 11:07:50 AM
 previous