Filter
Top Products
English
5
Rechargeable system
The FM transmitter recharges the
headphone’s built-in rechargeable LR03/ AAA
NiMH batteries. Just position the headphone
and connect the charging cable between the
headphone and the transmitter.The green
LED lights up during charging.
Easy transmission
The FM headphone is able to receive signals
from the transmitter,even through barriers
such as doors, walls and windows.
Multiple headphones with one
transmitter
An additional number of headphones
and/or wireless speakers can be used with a
single transmitter if they:
- operate in the 864 MHz band
- can detect a 19 kHz pilot tone
Please consult the appliance’s electrical
specification sheets for confirmation on
compatibility.
Kit contents
This FM headphone system consists of the
following accessories:
1 x SBC HC8802 FM transmitter
1 x SBC HC8805 FM headphone
1 x SBC CS030/00 12Volt / 200mA AC/DC
adapter (for UK:SBC CS030/05 12 Volt/
200 mA AC/DC adapter)
2 x rechargeable batteries LR03/AAA
(NiMH), 550 mAh
1 x 3.5 mm stereo plug to 2x RCA audio
cable (2 m)
1 x recharge cable (55 cm)
1 x 3.5 mm plug to 6.3 mm stereo adapter
plug
1 x headphone support pin
Transmitter (figure 1)
1 Headphone support pin
2 Power indicator – lights up when audio
signals are detected at the audio input.
3 Recharging indicator – lights up when
the recharge cable is connected between
the headphone and the FM transmitter.
Completely flat batteries will be fully
charged after about16 hours.
4 Recharging input – connect the
recharge cable to the input.
5 DC power – connect to the 12 Volt/
200 mA AC/DC adapter
6 3.5 mm stereo headphone audio
input – connects your FM transmitter to
an audio source
7 Channel switch – select one of
3 channels for best reception.We advise
you to select channel 1 as a first option.
8 Controls plate
General information Controls
XP SBC HC 8800/00-1.1 03-08-2001 16:45 Pagina 5