Philips SBC HC210 Headphones User Manual


 
9
English
Maintenance – If the headphone will not be used for a longer time,
please remove the batteries to prevent leakage and
corrosion.
– Only replace the batteries with Philips SBC HB550S
batteries.
– Do not leave the headphone near heat sources. Do
not expose to direct sunlight, excessive dust, moisture,
rain or any kind of mechanical shock.
– Do not use alcohol, thinner or petroleum-based
substances to clean the headphone or transmitter.Use a
slightly dampened chamois cloth to clean the housing.
– Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives as these may harm the housing.
Troubleshooting Specifications*
Hearing Safety! Continuous use at a high volume may permanently
damage your hearing.
System: Infra Red (IR)
Modulation: Frequency Modulation (FM)
Effective Transmission Range: 7 meters max. range (depending on ambient conditions
and restricted to line of sight w.r.t.the transmitter)
Input level: 800 mVrms (1 kHz sine wave)
Power supply – transmitter: 12Volt / 200 mA DC, centre positive
Power supply – headphone: 2x 1.2V RO3 (AAA)
Philips SBC HB550S batteries (NiMH)
Carrier Frequency
(Headphone): 2.3 Mhz (L), 2.8 Mhz (R)
Signal/Noise ratio: > 55 dB (1 kHz sine wave ,A-weighted)
Distortion: < 1% THD
Channel separation: > 30 dB
is a trademark of SRS Labs, Inc.
Headphone technology is incorporated under license from SRS Labs, Inc.
*) All specifications are subject to change without prior notice.
XP SBC HC 210.1 SRS 07-04-2003 10:22 Pagina 9