Filter
Top Products
Maintenance – If the headphone will not be used for a longer time,
please remove the batteries to prevent leakage and
corrosion.
– Do not leave the headphone near heat sources. Do
not expose to direct sunlight, excessive dust, moisture,
rain or any kind of mechanical shock.
– Do not use alcohol, thinner or petroleum-based
substances to clean the headphone or transmitter.Use a
slightly dampened chamois cloth to clean the housing.
– Do not use cleaning agents containing alcohol, spirits,
ammonia or abrasives as these may harm the housing.
Troubleshooting Specifications*
Hearing Safety! Continuous use at a high volume may permanently
damage your hearing.
8
English
System: Infra Red (IR)
Modulation: Frequency Modulation (FM)
Effective Transmission Range: 7 meters max. range (depending on ambient conditions
and restricted to line of sight with relation to the
transmitter)
Input level: 300 mVrms (1 kHz sine wave)
Power supply – transmitter: 12 Volt / 200 mA DC, centre positive
Power supply – headphone: 2 x 1.5 V AAA batteries
Carrier Frequency
(Headphone): 2.3 MHz (L), 2.8 MHz (R)
Signal/Noise ratio: > 55 dB (1 kHz sine wave ,A-weighted)
Distortion: < 1% THD
Channel separation: > 30 dB
*) All specifications are subject to change without prior notice.
XP SBC HC 130/00-1 15-03-2002 11:48 Pagina 8