Philips FWV537 Stereo System User Manual


 
22
English
3140 115 30491
Resume
This feature is also applicable to audio CD
(except for MP3-CD).
In stop mode, press RESUME on the remote
control to start playback again from where you
have stopped.
Note:
Resume information is lost if you have changed
the disc, opened the disc tray, change source or
disconnected the system from the power supply.
Resume is not available when PBC mode is
switched on.
Slow
1 Press SLOW on the remote control to watch a
VCD at a slower speed. There are 3 types of
slow modes to select.
The sound will be muted.
On TV screen, “SLOW 1”, “SLOW 2” or
SLOW 3” will be displayed.
2 To resume playback at normal speed, press
PLAYÉÅ.
Vocal
This feature allows you to fade out the original
vocal from a karaoke VCD. This feature is used
together with Echo mode. You can also use it to
select the different audio modes.
Pressing VOCAL on the remote control
repeatedly allows you to select the following
modes.
STEREO STEREO VOCAL LEFT
STEREO VOCAL RIGHT MONO LEFT
MONO RIGHT STEREO
STEREO – same effect as the original recorded
disc.
STEREO VOCAL LEFT/RIGHT – fade out the
original vocal for special recorded Karaoke disc
only (with the ECHO mode switched on).
MONO LEFT/RIGHT – select the language on a
bilingual VCD.
Ensure that Echo mode is switched on
when press VOCAL to fade out the original
vocal during STEREO VOCAL LEFT/RIGHT
mode.
CD/VCD/MP3-CD Operation
Key Control ( I È i )
This feature allows you to change the key tone
of your vocal range.
Press
II
II
I on the remote control to decrease
vocal key level.
"KEY -X" and appears on the display.
Press
ii
ii
i on the remote control to increase vocal
key level.
"KEY +X" appears on the display.
Press
ÈÈ
ÈÈ
È on the remote control to restore vocal
key to original setting.
"KEY FLAT" appears on the display.
Note:
–“X denotes the key level.
Echo
This feature allows you to add echo while singing
or talking through a microphone.
Press ECHO
--
--
-/
++
++
+ on the remote control to
decrease, increase or switch off the echo effect.
"ECHO +X" or "ECHO OFF" appears on the
display.
Notes:
–“X denotes the echo level.
You are advised to switch off the echo effect
when not using the feature.
If microphone is not inserted, INSERT MIC
will be displayed.
Echo will switch off automatically when unplug
the microphone from the system.