Filter
Top Products
12 EN
3 Get started
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
1
Press and push the battery compartment
to slide it open (see "1" in the illustration).
2 Insert two AAA batteries with correct
polarity (+/-) as indicated.
3 Push and slide back the battery
compartment (see "3" in the illustration).
Note
The batteries shall not be exposed to excessive heat
If you are not going to use the remote control for a
long time, remove the batteries.
Do not mix batteries (old and new or carbon and
alkaline, etc.).
Batteries contain chemical substances, so they should
be disposed of properly.
Connect power
Caution
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the head of the AC power cord.
Risk of electric shock! When you unplug the power
cord, always pull the plug from the socket. Never pull
the cord.
Note
Before you connect the AC power cord, make sure that
you have completed all other connections.
Connect the AC power cord to
the ~ AC IN socket on this unit.
the wall power socket.