Philips FWD798/37B Stereo System User Manual


 
45
English
Other Functions
Switching on/off
Switching the system ON
In Standby/ Demonstration mode
Press STANDBY ON.
The system will go back to its previous status.
Press DISC, TUNER, TAPE, AUX.
The system will switch to the selected source.
Switching the system to STANDBY
mode
In demonstration mode
Press and hold STOP 7 on the system.
In any other source mode
Press and hold STANDBY ON (or 2 on the
remote control).
When the system is in Standby mode, the
time will appear on the display.
Switching to ECO POWER standby
mode
In any other source mode
Press STANDBY ON (or 2 on the remote
control) to switch the system to the ECO
POWER standby mode.
If the system is in the ECO POWER mode, you
can press and hold STANDBY ON (or 2 on
the remote control) to switch to the standby
mode.
Power saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you
don’t press any button within 30 minutes in the
stop mode.
Dimming the display
Press DIM repeatedly to select different levels of
brightness for the display: HIGH, MID or LOW.
Vocal
This function allows you to fade out the original
vocal from a karaoke. Press AUDIO key to
select different audio modes.
For DVD karaoke discs:
AUDIO 1, AUDIO 2, AUDIO 1 VOCAL,
AUDIO 2 VOCAL.
For VCD karaoke discs:
LEFT VOCAL, RIGHT VOCAL, MONO LEFT,
MONO RIGHT or STEREO.
p026-051-FWD798_37_EngB 2006.5.22, 3:21 PM45