Filter
Top Products
Audio cable
( white , red )
MW loop
antenna
FM antenna
( T type)
( pig
tail )
Remote control and
AAA sise batteries
AC power cable
Composite vide
cable ( yellow )
Component vide cable
( red , blue , green )
Detailed playback features and additional functions are described in the
accompanying owner’s manual
Make sure your DVD system and TV are connected and turned on!
Plug & Play
1 Turn on the system.
“AUTO INSTALL PRESS PLAY” will be displayed.
2 Press PLAY 2; on the system to start installation.
Playing a disc
3 Press DISC on the remote control to select disc mode.
4 Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD
system).
5 Press OPEN
0
CLOSE on the front of the DVD system and load a disc, then
press the corresponding OPEN
0
CLOSE again to close the disc tray.
Make sure the disc label is facing up. For double-sided discs, load the side you want to play
face up.
6 Playback will start automatically.
If a disc menu appears, use
1 / 2 / 5 / 4 buttons on the remote to make the necessary
selection, then press OK to confirm. Or, use the Numeric Keypad on the remote to select
features. Follow the instructions given in the disc menu.
7 To stop playback, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or Region 3,
in order to play on this DVD system.
You should find the below accessories in the packaging box.
3
ALLALL
AV IN
??
FWD185 QSG_Eng without DEMO 1/1/32, 3:55 AM2