Filter
Top Products
3139 116 19811 (ENG)
21
STANDBY
-
ON
TAPE 2
PLAYBACK
TAPE 1
FW-
C10
MINI HIFI SYSTEM
CD1 • 2 • 3
TAPE 1 • 2
TAPECD TUNER
AUX
PRESET
▲
▲
TUNING
▲
▲
▲
▲
STOP• CLEAR
SEARCH
PLAY• PAUSE PREV NEXT
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
•
D
B
B
CDR/VIDEO
JOG
CONTROL
PROGRAM DIM
RECORD
DUBBING A.REPLAY
INCREDIBLE
SURROUND
V
E
C
D
S
C
T
E
C
H
N
O
R
O
C
K
J
A
Z
Z
O
P
T
I
M
A
L
OPEN
▲
OPEN
▲
FM • AM
SOUND NAVIGATION - JOG
CLOCK
•
TIMER
MASTER
VOLUME
Notes:
– For recording, use only tape of IEC type
I (normal tape) or IEC type II (Cr0
2
).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of VOLUME,
DBB, Incredible Surround, DSC or VEC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
– If "CHECK TAPE" is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr0
2
tape
detection hole when covering the tab
opening.
One Touch Recording
• For One Touch Recording, as soon as
you press RECORD, the current
source (CD, TUNER or AUX) will be
recorded on tape deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
™ The REC flag starts flashing.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in
TAPE mode, "SELECT SOURCE" will
be displayed. One Touch Recording is
not possible in TAPE mode.
RECORDING
CD Synchro Start
Recording
1 Load a blank tape into tape deck 2
and a disc into a disc tray.
2 Press CD to select CD mode.
• You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If not,
select the disc by pressing CD (CD
1•2•3) and the tracks are recorded
according to the order on the
selected disc.
3 Press RECORD to start recording.
™ The REC flag starts flashing.
4 Press Ç to stop recording.
Dubbing tapes (from tape deck 1
to tape deck 2)
1 Press TA PE ( TAPE 1•2 ) to select
tape deck 2.
2 Load the prerecorded tape into tape
deck 1 and a blank tape into tape
deck 2 with full spool to the left.
3 Press DUBBING.
™ "DUB" with "2" scrolling right will
be displayed.
• Dubbing will start immediately.
™ The REC flag starts flashing.
4 Press Ç to stop dubbing.
pg 01-29/C38/37-En 2/16/00, 9:01 AM21