Philips FW 306 Stereo System User Manual


 
7
3139 116 17531
English
A AM Antenna Connection
Connect the supplied loop antenna to the AM AERIAL
terminal. Place the AM loop antenna far away from the
system and adjust its position for the best reception.
B FM Wire Antenna Connection
Connect the supplied FM wire antenna to the FM 75
terminal. Adjust the position of the FM antenna for the
best reception.
Outdoor Antenna
For better FM stereo reception connect an outdoor FM
antenna to the FM AERIAL 75 terminal using a 75
coaxial wire.
C Speaker Connections
Connect the right speaker to Front terminal R, with the
red wire to + and the black wire to -.
Connect the left speaker to Front terminal L, with the
red wire to + and the
black wire to -.
Clip the stripped portion
of the speaker wire as
shown.
D Connecting other equipment to your
system
You can connect the audio left and right OUT terminals of
a TV, VCR, Laser Disc or DVD player to the AUX IN
terminals at the rear of the system.
E AC Power Supply
After all other connections have been made, connect the
AC power cord to the system and to the wall outlet.
PREPARATION
Inserting batteries into the Remote
Control
Insert the batteries (Type R03 or AAA) into the
remote control as shown in the battery compartment.
To avoid damage from possible battery leakage,
remove dead batteries or batteries that will not be
used for a long time. For replacement, use type R03 or
AAA batteries.
unlock lock
12 mm
pg 01-22/FW326/22-Eng 12/9/98, 15:547