Filter
Top Products
15
English
Notes :
– When EASY SET is used, all previously stored stations
will be erased.
– The last preset station will appear on the display when
EASY SET is completed.
Switching the system ON
• Press STANDBY•ON
(on the system only)
, CD,
TUNER, TAPE or AUX.
You can also switch on the system by pressing any one of
the CD DIRECT PLAY buttons.
Switching the system to standby mode
• Press STANDBY•ON again.
™ The system will switch to standby mode.
Selecting the Source
• Press the respective source selection button: CD,
TUNER, TAPE or AUX.
™ The display indicates the selected source.
Note:
– For an external source, make sure that you have
connected the audio left and right OUT terminals of the
external equipment (TV, VCR, Laser Disc or DVD player)
to the AUX IN terminals.
Sound Control
Volume Adjustment
Adjust VOLUME to increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the n socket at the front
of the system. The speakers will be muted.
OPERATING THE SYSTEM
Digital Sound Control (DSC)
The DSC feature enables you to enjoy special sound effects
that have preset equalizer settings, providing the best
music reproduction.
• Press DIGITAL SOUND CONTROL (DSC) to select
OPTIMAL, JAZZ, ROCK or TECHNO.
™ The Digital Sound Control display panel will light up
respectively.
™ “OPTIMAL, JAZZ, ROCK or TECHNO” will be
displayed.
Automatic DSC-DBB selection
The best setting for the DBB is automatically generated for
the respective DSC selection. You can manually select the
DBB setting that best suits your listening environment.
DSC Selection
Optimal
Jazz
Rock
Techno
DBB On/Off
On
Off
Off
On
Dynamic Bass Boost (DBB)
The DBB mode enhances the bass response.
• Press DBB to switch on bass response.
™ The DBB button lights up.
™ “DBB ON” will be displayed.
DBB DBB
DBB
OFF
DBB
ON
To switch off DBB
• Press DBB again.
™ The DBB button light is switched off.
™ “DBB OFF” will be displayed.
Note:
– Some CDs or tapes might be recorded in high
modulation. It may cause a distortion at high volume. If
this occurs, switch off DBB or reduce the volume.
Mute (only on remote control)
This feature allows you to temporarily switch off the sound
of the system without switching off the system when you
require a moment of silence.
• Press MUTE on the remote control to switch off the
sound.
™ “MUTE” will be displayed.
• Press MUTE again on the remote control or increase the
VOLUME level to switch on the sound.