Philips FR-995 Home Theater System User Manual


 
DISPLAY
14
The display of the receiver is divided into 4 sections, which
are to be used for the following:
Speaker diagram
A rectangle with a letter in it shows that a speaker has been
selected in the setup menu. However, the subwoofer indicator
will only light when a subwoofer signal is available. If only a
letter is shown, this speaker is not used and its sound is
reproduced by the other speakers.
.......virtual surround sound
SURROUND.................surround sound is reproduced
DIGITAL SURROUND ....digital surround sound is reproduced
L, R ...........................front left and right speaker
C...............................center speaker
SL, SR .......................surround speakers
SW............................subwoofer
Menu indication
These signs show you if the menu is on or off and indicate in
which direction you may move.
MMEENNUU .......................menu is on
1..............................You may move backwards to the previous
menu topic using 1 PREV. / EXIT (left
key on the remote control).
3 .............................You may move up in an option list using
X MENU NAVIGATOR (up key on the
remote control).
4 .............................You may move down in an option list
using X MENU NAVIGATOR (down key
on the remote control).
2..............................You may move forward to the next menu
topic using NEXT 2 (right key on the
remote control).
OOKK.............................You may confirm the displayed value.
Status lights
Signs show you various settings and information about the
status of the receiver.
PRESET......................Tuner is tuned to a preset radio station.
SENS HI.....................Tuner is switched to high sensitivity.
SENS LO..................Tuner is switched to low sensitivity.
CCIINNEEMMAA LLIINNKK OONN ......CINEMA LINK is active
STEREO......................An FM station is being received in stereo.
R.............................An RDS station is being received.
EON...........................An RDS station with EON is being
received.
HALL..........................HALL effect is on.
TA .............................RDS traffic announcement is on
NEWS........................RDS news announcement is on
ANA ..........................Analogue input is being used for the
playing source.
NNIIGGHHTT .......................NIGHT MODE is on.
COAX
1
......................Coaxial digital input COAX 1 is being
used for the playing source.
COAX
2
.....................Coaxial digital input COAX 2 is being
used for the playing source.
DDOOWWNNMMIIXX.................Incoming multi channel signals are being
reduced to fewer output signals
(depending on the number of speakers).
OPT...........................Optical digital input OPTICAL IN is being
used for the playing source
(FR 984, FR 985, FR 986, FR 994 only).
OPT
1
........................Optical digital input OPTICAL 1 IN is
being used for the playing source
(FR 995, FR 996 only).
OPT 2 .......................Optical digital input OPTICAL 2 IN is
being used for the playing source
(FR 995, FR 996 only).
LOUDNESS .................LOUDNESS is switched on.
Information area
This area is used for feedback of the receiver, tuner
frequencies, menu options, values and scrolling text
messages.
AA
TV
Ç
É
MENU
OK
GUIDE
NEWS/TA
0
Display
English