Filter
Top Products
15
English
Step 3: Connecting the FM/
MW antennas
A Connect the supplied MW loop antenna
to the MW socket. Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
B Connect the supplied FM antenna to the
FM socket. Extend the FM antenna and
x its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
Step 4: Connecting the
power cord
After everything is connected
properly, plug the AC power cord
into the power outlet.
The Eco Power LED on the DVD system
will light up. Never make or change any
connections with the power turned on.
Helpful Hints:
– Refer to the type plate at the rear or
bottom of the product for identi cation and
supply ratings.
L
R
1
2
>
Basic Connections (continued)
TV
L
R
x the claw
into the slot
FM antenna
MW
antenna
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.