Philips CTS4000/12 Home Theater System User Manual


 
English
EN 13
Connect
Connect video cables
This section describes how to connect this
Compact Theatre System to your TV so to
enable viewing of disc play.
Select the best video connection that your TV
can support.
Option 1: Connect to the HDMI socket
(for a HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the SCART socket
(for a standard TV).
Option 3: Connect to the Video (CVBS)
socket (for a standard TV).
Note
You must connect this unit directly to a TV.
Before you connect
1 Remove the rear cover from this unit.
2 Connect the cables to the corresponding
sockets.
3 Attach the rear cover.
Option 1: Connect to the HDMI
socket
HDMI IN
1 Connect a HDMI cable (supplied) from the
HDMI socket on this unit to the HDMI IN
socket on your TV.
Note
The HDMI connector is only compatible with HDMI
compliant TVs and DVI-TVs.
Tips
To optimise the video output, see chapter ‘Adjust
settings’ > [ Video Setup ] > [ HDMI Setup ] for
details. .
Use an HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is
needed to complete this connection.
To route the audio from your TV to this Compact
Theatre System, connect an audio cable from the
audio input on this unit to the audio output on your
TV.
This type of connections provides best picture
quality.
1_cts4000_12_eng3.indd 131_cts4000_12_eng3.indd 13 10/6/2008 10:53:58 AM10/6/2008 10:53:58 AM