Filter
Top Products
Search
1 Hold down 5 or 6 (in Play mode).
➜ The player first searches backwards or forwards at
10 times normal speed with sound at low volume, then
goes to 50 times normal speed with sound muted.
2 Release the button at the desired passage.
➜ Play will start at the desired passage.
Note: During Shuffle, Repeat Track or Programmed play, search
is restricted to within the track being played at the time.
Shuffle (random order) play
Only in Changer mode.
1 Press SHUFFLE before or during CD play to start shuffle
play.
➜ The tracks on the CD (or program if set) will play in
random order.
2 Press SHUFFLE again to return to normal CD play.
➜ CD recorder goes to Stop mode.
Note: Shuffle is also cleared when you open the disc tray.
Repeat CD, track or program
1 Press repeat one or more times during CD play.
➜ When REPEATTRACK lights up, the current track will
play repeatedly.When REPEAT ALL lights up, the entire
disc or program plays repeatedly.
2 To return to normal play, press REPEAT one or more times
until:
➜ The REPEAT text disappears from the display.
Note:
You can use shuffle in combination with REPEAT ALL or
programmed play.
REPEAT is also cleared when you open the disc tray.
Programming tracks
0 You can program up to 99 tracks to play in any desired
sequence.
0 Tracks can be programmed more than once, but each time
counts as a track (STEP).
0 A program for playback can be made from both the disc in
the recorder deck and the disc in the player deck.A
program for recording can only be made from the disc in
the player deck.
Programming
1 Select Changer mode or DJ mode using the DJ MODE key.
➜ CHANGER or DJ MODE appears on the display.
2 Press CDR or CD to select the required deck.
➜ Selected key lights up.
3 In Stop mode press PROG to enter Program mode.
➜ PROG flashes and PROGRAM followed by track
information appears on the display.
4 Select the desired track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys and press
ENTER to confirm. For 2-digit numbers, press the keys in
rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number
of programmed tracks (STEPS) are displayed.
5 Repeat step 4 for all tracks to be programmed.
6 Press STOP 9 or PROG to end programming.
➜ PROG lights continuously.
7 Press PLAY/PAUSE 2; to start programmed play.
Notes:
To review the program, press PROGRAM, followed
by 5 or 6 with the CD recorder in Stop mode.
To add more tracks to the program, repeat steps 3 to 7.
If you try to store more than 99 tracks, PROG FULL will
appear on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
➜ PROG will disappear from the display.
0 The program is also cleared when you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROG to enter Program mode.
2 Use 5 or 6 to select the track from to be deleted.
➜ The track number and program step will be shown on
the display.
3 Press CANCEL/DELETE to erase the track from the
program.
➜ The remaining program steps and the remaining playing
time on the program will be displayed.
4 Repeat steps 2 and 3 for all tracks to be erased.
5 Press STOP 9 or PROG to end erasing.
➜ PROG will light up continuously.
E
A
S
Y
J
O
G
S
T
O
R
E
/
M
E
N
U
C
A
N
C
E
L
/
D
E
L
E
T
E
CD
AUDIO CD PLAYBACK
ENTER
Playing
25
English
xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 25