Filter
Top Products
Search
1 Hold down 5 or 6 (in Play mode).
➜ The player first searches backwards or forwards at
10 times normal speed with sound at low volume, then
goes to 50 times normal speed with sound muted.
2 Release the button at the desired passage.
➜ Play will start at the desired passage.
Note: During Shuffle, Repeat Track or Programmed play, search
is restricted to within the track being played at the time.
Shuffle (random order) play
1 Press SHUFFLE before or during CD play to start shuffle
play.
➜ The tracks on the CD (or program if set) will play in
random order.
2 Press SHUFFLE again to return to normal CD play.
➜ CD recorder goes to Stop mode.
Note: Shuffle is also cleared when you open the disc tray.
Repeat CD, track or program
1 Press repeat one or more times during CD play.
➜ When REPEAT TRACK lights up, the current track will
play repeatedly.When REPEAT ALL lights up, the entire
disc or program plays repeatedly.
2 To return to normal play, press REPEAT one or more times
until:
➜ The REPEAT text disappears from the display.
Note:
You can use shuffle in combination with REPEAT ALL or
programmed play.
REPEAT is also cleared when you open the disc tray.
Programming tracks
0 You can program up to 99 tracks to play in any desired
sequence.
0 Tracks can be programmed more than once, but each time
counts as a track (STEP).
Programming
1 In Stop mode press PROGRAM to enter Program mode.
➜ PROG flashes and PROGRAM followed by track
information appears on the display.
2 Select the desired track numbers by turning the
EASY JOG/ENTER key left or right and store by pressing
ENTER.
or:
Key in a track number with the number keys and press
ENTER to confirm. For 2-digit numbers, press the keys in
rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number
of programmed tracks (STEPS) are displayed.
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP 9 or PROGRAM to end programming.
➜ PROG lights continuously.
5 Press PLAY/PAUSE 2; to start programmed play.
Note:
To review the program, press PROGRAM, followed by
5 or 6 with the CD recorder in Stop mode.
To add more tracks to the program, repeat steps 1 to 5.
If you try to store more than 99 tracks,
PROG FULL will appear on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
➜ PROG will disappear from the display.
0 The program is also cleared when you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROGRAM to enter Program mode.
2 Use 5 or 6 to select the track from to be deleted.
➜ The track number and program step will be shown on
the display.
3 Press CANCEL/DELETE to erase the track from the
program.
➜ The remaining program steps and the remaining
playing time on the program will be displayed.
E
A
S
Y
J
O
G
S
T
O
R
E
/M
E
N
U
C
A
N
C
E
L
/D
E
L
E
T
E
Playing
22
English
xp CDR 600/00_01 English 06-04-2001 18:19 Pagina 22