Filter
Top Products
Congratulations on your purchase, and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome.
1 Safety
Read and understand all instructions before you use this product. If
damage is caused by failure to follow the instructions, the warranty
does not apply.
• Risk of injury: Never install the receiver and its accessories on
the airbag cover.
• Risk of overheating: Do not x the DAB radio receiver to the
metal surface of the main unit.
• Risk of electromagnetic interference: Do not install the DAB
radio receiver over any sensors or vents.
• Risk of short circuit, malfunction, or damage to this product:
Do not alter the cable of DAB radio receiver or dismantle the
receiver box.
• Risk of damage to the DAB radio receiver: Never pull its cable
when you remove the receiver.
2 Install the DAB radio receiver
Note
• No DAB radio antenna is bundled. Consult your local retailer to
purchase it.
• Make sure that no lead other than the DAB radio antenna contacts
the antenna connector of the DAB radio receiver.
1 Connect the DAB radio receiver to the main unit.
2 Connect a DAB radio antenna to the DAB radio receiver.
3 Secure the DAB radio receiver to your car.
3 Product information
Note
• Specications are subject to change without prior notice.
Power supply 12 V DC (11 V - 16 V), negative
ground
Frequency range 174.928 - 239.200 MHz
Usable sensitivity (EN50248) < -95 dbm
Dimensions (W X H X D) 98 X 23 X 57 mm
4 Notice
Any changes or modications made to this device that are not
expressly approved by Philips Consumer Lifestyle may void the
user’s authority to operate the equipment.
Care of the environment
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a
product it means that the product is covered by the European
Directive 2002/96/EC. Please inform yourself about the local
separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your
old products with your normal household waste.
Correct disposal of your old product helps to prevent potential
negative consequences for the environment and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to
make the packaging easy to separate into three materials: cardboard
(box), polystyrene foam (buffer) and polyethylene (bags, protective
foam sheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
Copyright
2013 © Koninklijke Philips Electronics N.V.
Specications are subject to change without notice. Trademarks
are the property of Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right to change products at
any time without being obliged to adjust earlier supplies accordingly.