Philips C50 Stereo Receiver User Manual


 
3139 116 19441 (ENG)
17
TUNER
Storing Preset Stations
You can store up to 40 radio stations in
the memory. When a preset radio
station is selected, the preset number
appears next to the frequency on the
display.
Automatic programming
1 Press TUNER (FM•AM).
2 Press PROG for more than one
second.
The PROGRAM starts flashing and
AUTO” will be displayed.
The system will search for every
available radio station in the FM
waveband first, then search the
AM waveband.
All available radio stations will be
stored automatically. The
frequency and preset number will
be displayed briefly.
The system will stop searching
when all the available radio
stations are stored or when the
memory for 40 preset radio
stations is used.
The system will remain tuned to
the last stored preset radio
station.
Notes:
You can cancel the automatic
programming by pressing PROG or
Ç
(on the system only).
If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10
before starting automatic programming,
only the preset numbers 10 to 40 will
be programmed.
Manual programming
1 Press TUNER (FM•AM).
2 Press TUNER (FM•AM) again to
select the desired waveband : FM or
AM.
3 Press PROG for less than one
second.
The PROGRAM starts flashing.
The next available preset number
will be displayed for selection.
4 Press à or á to tune to the
desired frequency.
If you wish to store the radio station
to another preset number, press 4
or 3 to select the desired preset
number.
5 Press PROG again.
The PROGRAM disappears and the
radio station will be stored.
Repeat steps 3 – 5 to store other
preset radio stations.
Notes:
When 40 radio stations are stored and
you attempt to store another radio
station, the display will show "FULL”.
If you want to change an existing
preset number, repeat steps 3 – 5.
You can cancel manual programming
by pressing
Ç
(on the system only).
During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
Press 4 or 3 to select the desired
preset number.
The preset number, radio
frequency, and waveband appear
on the display.
pg 01-28/C50-C70/37-Eng 18/11/1999, 2:39 PM17