Filter
Top Products
OPERATION
14
Press the ESA button to switch on/off ESA.
yy
The ESA symbol lights up in the display.
yy
The ESA memory continuously stores in advance the CD
data to be played. This is to prevent sound skipping
during play due to shock and vibration.
yy
Prolonged shocks and vibrations may empty the ESA
memory completely and CD play will be interrupted.
Note: When switching the ESA feature on and off, CD play will be delayed or
interrupted for a short time.
RESUME – playing from where you have stopped
1 Activate the RESUME feature by sliding the RESUME/HOLD
switch to the center setting.
2 If you stop CD play by pressing the STOP 9 button, the last
position played will be stored.
3 Press 2; to resume CD play from the position it was
stopped at.
HOLD – deactivating all buttons
Activate the HOLD feature by sliding the RESUME/HOLD switch to the far right.
yy
Now all buttons are locked until you switch the feature off again. If you press a
button (except OPEN), the display will indicate HOLD.
Note: - In the HOLD position, the RESUME function is automatically activated.
- Opening the lid erases the information about the last position played.
P
R
O
G
RESUME / HOLD
ESA – Electronic Shock Absorption Memory
English