Filter
Top Products
Selecting a different track
• Press
∞/ §
once or repeatedly until the
desired track number appears in the display.
For MP3/WMA-CD: First press
43
once
or more to select your album.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold ∞ or § .
➜ The CD is played at high speed and with
reduced volume.
2 When you recognize the passage you want,
release ∞ or § to resume normal playback.
Helpful hints:
– When your searching reaches the end of the
last track, the CD goes to stop mode.
Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to
activate programming.
➜ Display: PROG and P01 flash. (See 5)
2 Press
∞
or
§
to select your desired track
number.
For MP3/WMA-CD: first press
43
once
or more to select your album.
3 Press PROG to store the desired track
number.
➜ Display: PROG and P02 flash for you
to program the next track.
4 Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ If you attempt to store more than 20
tracks, no track can be selected and the
display shows ---.
5 To play your program, press
2
/
;
.
Helpful hints :
– When playback of your program comes to the
stop position, your set will return to normal
playback. To re-enter program mode, press
PROG in the stop position.
Reviewing the program
In the stop position, press PROG repeatedly
to see your stored tracks.
Erasing a program
You can erase the contents of the memory by:
– in the stop position, press PROG to
enter program mode, and then press
9.
– during program play, press
9
twice
.
– selecting
USB
,
RADIO
or
OFF
;
– opening the CD door;
Different play modes:
REPEAT. and SHUFFLE
(See 6
, 7)
You can select and change the various play
modes before or during playback, and
combine REPEAT modes with PROG
(PROGRAM).
– plays the current track continuously.
For MP3:
ALB – plays all tracks of current album
repeatedly.
– plays all tracks/program repeatedly.
– plays all tracks in random order.
1 To select play mode, press MODE once or
more.
➜ The display shows the related icon.
➜ When you select SHUFFLE mode, play
starts automatically.
2 Press 2; to start playback if in the stop/
pause position.
3 To return to normal playback, press MODE
repeatedly until the modes are no longer displayed.
– You can also press 9 to cancel your play
mode.
MP3/WMA/CD Player
AZ382_DFU_96_eng.indd 7AZ382_DFU_96_eng.indd 7 2009-3-25 16:15:082009-3-25 16:15:08