Filter
Top Products
7EN
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install batteries
Note
•
You can use both batteries and AC power as power
supply of this device.
1 Open the battery compartment.
2 Insert 6 x 1.5 V R14/UM2/C CELL
batteries (not supplied) with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
6 x 1.5 V R14/UM2/C CELL
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the product.
• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
• Before you connect the AC power cord, make sure that
you have completed all other connections.
Note
•
To save energy: switch the source selector to OFF
after use.
• The device switches to standby mode if keeps inactive
for 15 minutes.