Filter
Top Products
English Controls/Power Supply
Supplied Accessories
– AC power cord
Top/front panels (See 1)
1
Source selector: CD,FM, MW, OFF
–
selects CD, or radio (FM/MW) source of
sound
–
power off switch
2
2; - starts or pauses CD playback
§ ∞
–
selects the next/previous track
– searches forwards/backwards (press and
hold the button) within the current track
PROG – programs tracks and reviews the
program
9
–
stops CD playback;;
–
erases a CD program
3
Display
–
shows the CD functions
4
REPEAT
–
repeats a track/
CD program/entire CD.
5 SHUFFLE –
plays all tracks in random order
6 OPEN•CLOSE – opens/ closes the CD
door.
7 TUNING
– tunes to radio stations
8
VOLUME
–
adjusts volume level.
Back/bottom panels (See 1)
9 Telescopic antenna - improves FM
reception.
0 Battery door - open to insert 6 x 1.5V
R-14/ UM-2/ C-cells
! p – 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
@ AC MAINS~ - inlet for power cord.
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in unsafe
operation.
This set complies with the radio
interference requirements of the
European Union.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
1 Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated
by the "+" and "–" symbols inside the com-
partment. (See
1)
2 Replace the battery door, making sure the bat-
teries are firmly and correctly in place.The set is
now ready to operate.
Batteries contain chemical substances, so
they should be disposed of properly.
• Incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to burst:
• Do not mix battery types: e.g. alkaline with car-
bon zinc. Only use batteries of the same type
for the set.
• When inserting new batteries, do not try to mix
old batteries with the new ones.
• Remove the batteries if the set is not to be used
for a long time.
AZ1123_A 2007.7.27 17:42 Page 5