Philips 78 Home Theater System User Manual


 
English
8239 300 32892
10
Connections
Step 4: Connecting FM/MW
antennas
Step 5: Connecting the
power cord
1
2
FM
antenna
MW
antenna
fix the claw into
the slot
~ AC MAINS
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
SUBWOOFER
FRONT
CENTER
2
1
Power Outlet
1 Connect the supplied MW loop antenna
to the MW jack. Place the MW loop
antenna on a shelf or attach it to a stand
or wall.
2 Connect the supplied FM antenna to the
FM (75) jack. Extend the FM antenna
and fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
Adjust the position of the antennas for
optimal reception.
Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
After everything is connected
properly,
1 Set the VOLTAGE SELECTOR to the
local power line voltage.
2 Plug in the AC power cord to the power
outlet.
Never make or change any connections
with the power switched on.
Helpful Hint:
Refer to the type plate on the rear or
bottom of the system for identification and
supply ratings.
001-035-MX2500D-78-Eng2 7/20/04, 3:11 PM10