Filter
Top Products
9
10
11
12
13
14
Steps for DIRECT one-touch dialling:
1. Lift the handset or press once the Speaker On/Off button.
2. Press once any of the 3 Direct Memory buttons (M1, M2 or
M3) in which you have stored the phone number. After you
finish, restore the handset or press once the Speaker On/Off
button.
Steps for INDIRECT dialling:
1. Lift the handset or press once the Speaker On/Off button.
2. Press once the Phonebook button, followed immediately by
the digit (0...9) on the Dial Keypad in which you have stored
the phone number. After you finish, restore the handset or
press once the Speaker On/Off button.
Chain Dialling
Extremely long telephone numbers can be dialled from a
combination of several memory buttons. What you need to do
first is to store the long telephone number separately in chunks
into any Direct or Indirect memory buttons. Each memory button
can store up to 16 digits.
Take a number like 001234567890. You can chop it into 3 chunks.
First, you store “001” into Direct memory (M1), then “234” into
(M2) and finally “567890” into Indirect memory (digit “1”).
To dial 001234567890:
1. Lift the handset or press once the Speaker On/Off button.
2. Press M1, then M2 and finally Phonebook button and digit “1”.
Mixed Mode Dialling
If you use “pulse” dialling but have to change to DTMF “tone”
dialling temporarily (eg. for telephone banking purpose), press
the * button after the call is connected to the DTMF network.
During this period, all the dial keys will be “tone” generated.
“Pulse” mode will be resumed after you disconnect the call.
IV. STORING YOUR PHONE
NUMBERS
• Your Elegance 44 provides you with 13 memories to store
your phone numbers. 3 of them are direct one-touch
memories and the remaining 10 are indirect memories.
• You can store up to 16 digits for each memory.
Steps to store your DIRECT one-touch memories:
You may want to store important phone numbers into these
direct memories.
1. Lift the handset or press once the Speaker On/Off button.
2. Press once the Store button.
3. Dial the phone number you want to store.
4. Press once the Store button again.
5. Press once any of the Direct Memory buttons (M1, M2, or
M3) in which you want to store the phone number.
6. After you finish, restore the handset or press once the Speaker
On/Off button.
Steps to store your INDIRECT memories:
1. Lift the handset or press once the Speaker On/Off button.
2. Press once the Store button.
3. Dial the phone number you want to store.
4. Press once the Store button again.
5. Press once any of the digits (0...9) on the Dial Keypad in which
you want to store the phone number.
6. After you finish, restore the handset or press once the Speaker
On/Off button.
UK
Your international guarantee
Dear Customer,
Thank you for purchasing this Philips product which has been designed and manufactured to
the highest quality standards.
If, unfortunately, something should go wrong with this product Philips guarantees free of
charge labour and replacement parts irrespective of the country where it is repaired during a
period of 12 months from date of purchase. This international Philips guarantee complements
the existing national guarantee obligations to you of dealers and Philips in the country of
purchase and does not affect your statutory rights as a customer.
The Philips guarantee applies provided the product is handled properly for its intended use, in
accordance with its operating instructions and upon presentation of the original invoice or
cash receipt, indicating the date of purchase, dealer’s name and model and production number
of the product.
The Philips guarantee may not apply if :
• the documents have been altered in any way or made illegible ;
• the model or production number on the product has been altered, deleted, removed or
made illegible ;
• repairs or product modifications and alterations have been executed by unauthorised service
organisations or persons ;
• damage is caused by accidents including but not limited to lightning, water or fire, misuse
or neglect.
Please note that the product is not defective under this guarantee in the case where modifications
become necessary in order for the product to comply with local or national technical standards
which apply in countries for which the product was not originally designed and/or manufactured.
Therefore always check whether a product can be used in a specific country.
In the event you require service whilst in another country a dealer address can be given to
you by the Philips Consumer Help Desk in that country.
In order to avoid unnecessary inconvenience, we advise you to read the operating instructions
carefully before contacting your dealer.
In case your Philips product is not working correctly or is defective, please contact:
PHILIPS CONSUMER COMUNICATIONS
PO BOX 1056
Kingston & Surbiton
Surrey
KT1 6YN
Phone : 0645 282828
SAFETY INFORMATION
The only way to cut off the power supply to the telephone /
answering machine is to disconnect the power supply block from
the mains outlet. Be sure that the mains outlet is located near the
telephone device and is easily accessible.
The CE mark on the product certifies its compliance with all
applicable technical regulations, as of the date of authorization,
concerning user safety and electromagnetic interference according
to directives 73/23/EEC, 89/336/EEC and 93/68/EEC.
Always follow basic safety precautions when using this product to
reduce the risk of injury, fire, or electric shock.
1. Read and understand all instructions in the user’s
manual. Observe all markings in the product.
2. During thunderstorms, avoid using telephones except
cordless models. There may be a slight chance of electric
shock from lightning.
3. Do not use a telephone in the vicinity of a gas leak. If
you suspect a gas leak, report it immediately, but use a
telephone away from the area where gas is leaking. If this
product is a cordless model, make sure the base is also away
from the area.
4. Do not use this product near water, or when you are
wet. For example, do not use it in a wet basement or shower,
or next to a swimming pool, bathtub, kitchen sink, or laundry
tub. Do not use liquids or aerosol sprays for cleaning. If the
product comes in contact with any liquids, unplug any line or
power cord immediately. Do not plug the product back in
until it has dried thoroughly.
5. Install this product in a protected location where no
one can trip over any line or power cord. Protect cords from
damage or abrasion.
6. If this product does not operate normally, read the
instruction in the user’s manual. Do not open this
product! Opening the product or reassembling it incorrectly
may expose you to hazardous voltages or other risks.
TELEPHONE CONNECTION:
The voltages used on this network are classified as TRT-3
(telecommunications network voltage as defined in standard EN 60-950).
CONNECTION INSTRUCTIONS:
The telephone, Philips Elegance 44 (TD9068), is designed for connection
to the analogue public switched telephone network (PSTN) only.
CONNECTION CONFIGURATION:
The telephone, Philips Elegance 44 (TD9068), can be used as a
single device and/or as part of a configuration with other pre- or
post- connected type-approved terminal equipment.
RINGER EQUIVALENCE NUMBER (REN):
Your Elegance 44 (TD9068) has a Ringer Equivalence Number
(REN) of 1.0. To determine the maximum number of telephones
that can be connected to your line, add together the individual
RENs of the apparatus you wish to connect. If this total exceeds
four, one or all of your telephones may not ring correctly.
This product may be used legally in the country where the
appropriate authority has given its specific authorization. This
authorization appears on a label on the base station.
In the interest of improving our products and services, Philips
reserves the right to alter the specifications without prior notice.