PhatNoise XXV-01D Stereo Receiver User Manual


 
English
|
13
DTA Front/DTA Rear
DTA Subwoofer
0 — 20.33 (feet)
Position Setting Front-Left/ Front-Right/
Front/ ALL
• When the "2ZONE" of <Audio Setup> (page 11) is
"ON", the following setups are ignored.
- "X'Over"
- "DTA"
- "POSI"
- "Preset"
6 Exit Sound Field Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
Sound Management system
1 Select the source to adjust
Press the [SRC] button.
2 Show the Multi-function display
Press the [NEXT] button repeatedly until
"S.M.S" appears.
Refer to <Notes on Multi-function System> (page
9).
3 Enter Sound Management mode
Turn the [VOL] knob to select "S.M.S".
Press the [VOL] knob.
• When "2ZONE" of <Audio Setup> (page 11) is ON, you
cannot select "S.M.S".
4 Select the Sound Management item to
adjust
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
Multi-function item Sound Management Item
"Cabin" Cabin Setting
"Front" Speaker Select Front
"Rear" Speaker Select Rear
"Sub-W" Speaker Select Subwoofer
"Preset" Preset value storage/recalling
• "Preset": You can store an adjusted sound control
value by selecting "Memory". Refer to
<Memory mode> (page 16). Also, you
can recall it by selecting "Recall". Refer to
<Memory Recall mode> (page 16).
5 Adjust the Sound Management item
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
Sound Managemnt Item Range
Cabin Setting OFF/ Compact/ Full Size Car/
Wagon1/ Wagon2/ Minivan1/
Minivan2/ SUV/ Minivan (Long)
Speaker Select Front 6 ½ / 6 ¾ / 7/ 4x6/ 5x7/ 6x8/ 6x9/
7x10/ O.E.M./ 4/ 5 (inch)
Speaker Select Rear 6 ½ / 6 ¾ / 7/ 4x6/ 5x7/ 6x8/ 6x9/
7x10/ None/ O.E.M./ 4/ 5 (inch)
Speaker Select Subwoofer 6 ½ / 8/ 10/ 12/ 15over/ None
(inch)
6 Exit Sound Managemnt mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.