Filter
Top Products
SPECIFICATIONS HV81 HV101 HV121
Woofer 8” treated paper cone 10” treated paper cone 12” treated paper cone
Amp Power 100 100 100
(Watts, continuous)
Amp Power 200 200 200
(Watts, peak)
Frequency Response 35-200 Hz 29-200 Hz 25-200 Hz
Dimensions* 10.75” W x 14.125” H x 14.75” D* 11.75” W x 17” H x 16” D* 14” W x 19.5” H x 18.25” D*
Finish Black Woodgrain Finish Black Woodgrain Finish Black Woodgrain Finish
*Add 1” to depth for connection.
AMPLIFIER SETUP AND BASS MANAGEMENT
Many home theater receivers/processors have a feature that controls how the bass is processed and delivered
to the subwoofer. It also adjusts the amount of bass that is sent to your satellite speakers. Look carefully in your
amplier or receiver’s instruction manual for details on how to adjust for the speaker size (sometimes called
“Speaker Setup”) for your system.
When using a Dolby® Digital or DTS™-capable receiver/processor with the subwoofer connected to the
subwoofer out on your amplier turn the “LOW-PASS FREQUENCY” control to the highest setting (200 Hz) on
the back of your subwoofer. Set the subwoofer crossover setting in the speaker setup section of the amplier
setup menu to 150 HZ (or the next highest setting) and set the Satellites and Center channels to “small”.
If you are NOT using the receiver’s internal processor for subwoofer control then turn the “CROSSOVER
FREQUENCY” control on the subwoofer to the 3 o’clock (150 Hz) setting.
WARRANTY
LIMITED WARRANTY
Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period
of ten (10) years for speaker product and three (3) years for the electronic components to the original purchaser.
Purchase must be made from an authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in
transit, alterations, unauthorized repairs, failure to follow instructions, re, ood or any other cause beyond the
reasonable control of Phase Technology. Defects in speaker cabinets or grilles must be brought to the attention
of your dealer immediately after purchase. This warranty will be void if the products’ serial number has been
altered or removed.
To obtain warranty service, defective product must be shipped in its original carton or equivalent together with
original invoice or bill of sale, insured and prepaid to your authorized Phase Technology dealer or the factory
when warranty service is requested.
If you choose to return the defective product to the factory you must rst call us at (888) phase-tk to obtain
a Return Authorization number prior to shipping. Product repaired under this warranty will be returned to you
freight collect.
Phase Technology Corporation www.phasetech.com
MSE Audio Group 8650 College Boulevard Overland Park, Kansas 66210 (866) 663-9770 www.mseaudio.com