Filter
Top Products
ZxA5 Am
p
lifie
r
(
cont’
)
C
r
ossove
r
Mode Switch
Selects between 40 Hz highpass filter for Fullrange
use, and 100 Hz highpass filter for use with a
subwoofer. It is not recommended that you use a
ZxA5 in Fullrange mode with subwoofers.
Level
This control sets the output level of the ZxA5 in a
range between -
∞
dB and +6dB. The internal power
amplifier provides a nominal input sensitivity of
+6dBu.
Power Switch
A
C switch for switching the ZxA5’s power ON or
OFF. The switch lights after turning the power ON.
If the switch is not lit upon turning the power on,
make sure that the AC cord is correctly connected.
If the AC cord is correctly connected and the AC
switch does not light upon power-on, please
contact your local dealer.
Mains In
A
C connection is established via a PowerCon
connector. A 15’ (5m) long AC cord with PowerCon
plug is supplied.
Mains Out
The PowerCon AC out socket allows the
connection of additional ZxA5 Systems.
To prevent AC network overload, connecting more
than (3) ZxA5 Systems to a single AC outlet (10A -
16A
)
is not recommended.
CAUTION:
This appliance has no user-serviceable parts inside. Leave any servicing
and maintenance to
q
ualified se
r
vice technicians onl
y
.
ELECTRO-VOICE
®
ZxA5 Owne
r
’
s Manual
6
CAUTION:
Blue and grey PowerCon power connector shall not be engaged or
disengaged when under load or live.