Filter
Top Products
Amplifier Level Settings:
Sensitivity set at –10 dB is recommended when using Peavey CS series amps.
All channels set to the same voltage gain, referenced to the 12” woofer)
Crest power amps should be used with the sensitivity setting in the x20 position and
the attenuators fully clockwise (wide open)
Please review our white paper on minimizing system noise when using VSX on our
website
VSX presets:
A VSX 26 may be used to provide a conventional 2 channel/stereo three way control
of any Versarray System. The VSX 48 should be selected when it is desirable to
control the system in “zones” that may be used to split coverage between balconies
and a main floor or when shading of EQ or Level is desired. The added control
provided by the VSX 48 gives the user additional capabilities to fine tune the system.
The VSX 48 presets also provide an easy means to use an “aux fed sub” system
(see our white paper … http://www.peavey.com/support/technotes/)
VSX26 presets:
Input A to out 1 – subs
out 2 – mids
out 3 – highs
Input B to out 4 – subs
out 5 – mids
out 6 – highs