Filter
Top Products
The two-way system is comprised of a
12" Sheffield
®
woofer with a highly linear
suspension. The high frequencies are
handled by an RX
™
22 two-inch titanium
diaphragm compression driver utilizing
ferrofluid cooling, coupled to a CH
®
3
constant directivity horn. This horn has a
smooth, even response with good high
frequency dispersion. The RX 22 driver
features the Radialinear Planar Phase
Correction System, under US Patent
6,064,745, which provides smoother and
extended high frequency response.
Input connection to the system is
made via two 1/4" phone jacks in parallel.
The internal passive crossover features
Sound Guard
™
III tweeter protection
circuit, an advanced topology crossover
with high performance components, to
provide high power handling and reliability.
Peavey’s proprietary high-frequency driver
protection circuitry, Sound Guard, provides
long and medium term driver overload
protection when the system is used full-
range, without impairing musical transients
or dynamics. The crossover provides
driver roll-off and protection, as well as
driver EQ for the woofer and horn, the
sum total is a clean, clear and smooth
response. High-quality, reliable crossover
components include polypropylene
capacitors, and high current inductors.
The optimal integration of the crossover
with the selected drivers results in a
smooth frequency response from 70 Hz
to 17 kHz.
Despite its compact dimensions for a
12" based enclosure, this system can put
out some very serious sound levels, and
take 500 Watts program of clean amplifier
power, resulting in clean coverage with
excellent clarity.
If the bulb in your Sound Guard should
ever burn out, a replacement may be
obtained from an Authorized Peavey
Service Center. However, if a Peavey
replacement bulb is not readily available,
an automotive type SK 3 clip in bulb may
be substituted for temporary use until a
Peavey bulb can be obtained.
Frequency Response:
This measurement is useful in
determining how accurately a given
unit reproduces an input signal. The
frequency response of the SP
™
6X is
measured at a distance of 1-meter
using a 1 Watt (into the nominal
impedance) swept-sine input signal. As
shown in figure 1, the selected drivers in
the SP 6X combine to give a smooth
frequency response from 70 Hz - 17 kHz.
Power Handling:
There are many different approaches
to power handling ratings. Peavey rates
this loudspeaker system’s power handling
using a full-range form of the AES
Standard 2-1984. Using audio band 20 Hz
to 20 kHz pink noise with peaks of four
times the RMS level, this strenuous test
signal assures the user that every portion
of this system can withstand today’s high
technology music. This rating is contingent
upon having a minimum of 3 dB of
amplifier headroom available.
Mounting
Caution: This unit is not designed for
overhead supesion.
Architectural and Engineering
Specifications
The loudspeaker system shall have an
operating bandwidth of 70 Hz - 17 kHz.
The nominal output level shall be 97.0 dB
when measured at a distance of one
meter with an input of one Watt. The
nominal impedance shall be 8.0 Ohms.
The maximum continuous power handling
shall be 250 Watts, maximum program
power of 500 Watts and a peak power
input of at least 1000 Watts, with a
minimum amplifier headroom of 3 dB. The
outside dimensions shall be 28.00 inches
high by 18.94 inches wide by 18.31 inches
deep. The weight shall be 67 pounds. The
loudspeaker system shall be a Peavey
model SP 6X.
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
60
70
80
90
100
110
dB SPL (re 20 Pa)
Amplitude Response (1W 1m On-Axis)
Figure 1
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
1
2
3
5
10
20
30
50
100
Impedance
Z
(
)
Figure 2