Filter
Top Products
55.. PPOOWWEERR//SSTTAATTUUSS LLEEDD
Located on front panel this LED illuminates green when the Power Switch is in the “ON” position and AC power is
supplied. During normal operation the LED also acts as a DDT indicator. The LED illuminates red when the DDT
speaker protection is active. When DDT is defeated, the LED will illuminate red when clipping occurs.
66.. IINNPPUUTT JJAACCKK
This input will accept signals from all types of bass pickups.
77.. IINNPPUUTT PPAADD SSWWIITTCCHH
Provided for instruments that have extremely high output, which can result in overdriving (distorting) the input
stage. Pressing the switch to its “in” or “active” position reduces the level of the input signal by 10 dB.
88.. BBRRIIGGHHTT SSWWIITTCCHH
Provides a preset boost to treble frequencies when pressed.
99.. TTUUNNEERR SSEENNDD JJAACCKK
A 1/4" jack is provided for connecting an instrument tuner. This jack is buffered off the input jack so it is just like
plugging directly into the tuner.
1100.. PPRREE GGAAIINN CCOONNTTRROOLL
Controls the input gain of the preamplifier.
1111.. CCOONNTTOOUURR CCOONNTTRROOLL
Provides a specially voiced EQ as the knob is rotated clockwise. When the knob is fully counterclockwise (set to
0), there is no voicing added.
1122.. LLOOWW CCOONNTTRROOLL
An active tone control (shelving type, ±15 dB) that varies the low frequency boost or cut.
1133.. MMIIDD CCOONNTTRROOLL
An active tone control (peak/notch, ±15 dB) that varies the midrange boost or cut.
1144.. MMIIDD SSHHIIFFTT CCOONNTTRROOLL
Selects the frequency band (200 — 2 kHz) that the mid control cuts or boosts.
1155.. HHIIGGHH CCOONNTTRROOLL
An active tone control (shelving type, ±15 dB) that varies the high frequency boost or cut.
6
9
18 17 19 20 23 25 2621 22
6
7
10
8
11 12 13 14 15 16 5
24
FFrroonntt PPaanneell