Filter
Top Products
SPECIFICATIONS QW
™
-2
MMoouunnttiinngg
This unit is not designed for over head
suspension. Optional flying version
available, contact your Peavey dealer or
rep for details.
AArrcchhiitteeccttuurraall aanndd EEnnggiinneeeerriinngg
SSppeecciiffiiccaattiioonnss
The loudspeaker system shall have an
operating bandwidth of 52 Hz to 18 kHz.
The nominal output level shall be 97 dB
when measured at a distance of one
meter with an input of 1 Watt. The
nominal impedance shall be 8 Ohms.
The maximum continuous power
handling shall be 800 Watts, maximum
program power of 1,600 Watts and a
peak power input of at least 3,200
Watts, with a minimum amplifier
headroom of 3 dB. The nominal
radiation geometry shall be 90˚ in the
horizontal plane and 40˚ in the vertical
plane. The outside dimensions shall be
33.38" high by 21.13" wide by 22.59"
deep. The weight shall be 98 pounds.
The loudspeaker system shall be a
Peavey model QW-
™
2.
33 ++ 22 YYEEAARR LLIIMMIITTEEDD WWAARRRRAANNTTYY
NNOOTTEE::
For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
60
70
80
90
100
110
dB SPL (re 20 Pa)
Amplitude Response (1W 1m On-Axis)
Figure 1
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
1
2
3
5
10
20
30
50
100
Impedance
Z
(
)
Figure 2