Pass Labs X5 Stereo Amplifier User Manual


 
7
X5 Owner’s Manual
All figures obtained after a 1 hour warmup, with regulated 120 VAC
power line. See manual notes about AC power line regulation.
Gain 30 dB
Freq. Response -0 dB at DC, -3 dB at 100 kHz
Power Output 125 X 5 watts maximum @ 1% THD,
1 kHz, 8 ohms
Maximum Output Voltage plus, minus 50 volts
Maximum Output Current plus, minus 10 amps
Input Impedance 22 kohm balanced
Damping factor 200 ref 8 ohms nominal
Slew rate plus, minus 50 V/uS
Output Noise 300 uV unweighted 20-20 kHz
Balanced CMRR -85 dB @ 1 kHz (input common
mode rejection ratio)
DC offset < 100 mv
Power Consumption 200 watts idle, 600 watts maximum
Temperature 20 degrees C. above ambient typical
Dimensions 19 “ W x 7” H x 20” D
Shipping Weight 74 lbs.
For more information please contact:
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690
Fax: 530.369.2193
www.passlabs.com
© 2006, Pass Laboratories Inc.
X5 Specifications
“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”,
“Aleph”, and “Zen” and are all registered trademarks of Pass
Laboratories, Inc., and all rights thereto are protected by law.