Pass Labs X2.2 Stereo Amplifier User Manual


 
8
X2.2 Owner’s Manual
Gain, Balanced: selectable 4 / 14dB
Gain, single-ended: selectable 4 / 14 dB
Freq. Response: -3 dB @ 2 Hz, -3 dB at @ 100K Hz
Distortion @ 1KHZ: < .1 % THD, typically .003% @ 2 volts
Maximum Output: 10 volts rms. bal out, 7 volts rms. unbal
Output Impedance: 200 ohms unbal, 750 ohms balanced
Input Impedance: 33K Ohm unbal, 66K Ohm balanced
CMRR: typ. -55 dB, 1KHz
Crosstalk: typ. -85 dB, 1KHz
Output Noise floor: < -125 dBV, 20Hz to 20KHz
External amp turn on: 12 volts DC 50 mA continuous
Power Consumption: 35 watts
Dimensions: 17” W x 11.5 “D x 3.5”H
Shipping Weight: 28 Lbs in packing
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690, Fax: 530.369.2193, www.passlabs.com
© 2006 Pass Laboratories Inc.
X2.2 Specifications
“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”,
“Aleph”, and “Zen” and are all registered trademarks of Pass
Laboratories, Inc., and all rights thereto are protected by law.