Pass Labs X1000 Stereo Amplifier User Manual


 
Page 21
X350 SPECIFICATIONS
All figures obtained after 1 hour warmup, with regulated 120 VAC power line. See manual
notes about AC power line regulation.
Gain 26 dB
Freq. Response -0 dB at DC, -4 dB at 100 kHz
Power Output 350 watts maximum @ 1% THD, 1 kHz, 8 ohms
Distortion refer to accompanying distortion curve
Maximum Output Voltage plus, minus 80 volts
Maximum Output Current plus, minus 20 amps
Input Impedance 22 kohm balanced
Damping factor 30 ref 8 ohms nominal
Slew rate plus, minus 50 V/uS
Output Noise 500 uV unweighted 20-20 kHz
Random noise floor approximately 2 uV
Dynamic range 150 dB (random noise floor to peak output)
Balanced CMRR -85 dB @ 1 kHz (input common mode rejection ratio)
DC offset < 100 mv
Power Consumption 600 watts idle, 1800 watts maximum
Temperature 20 degrees C. above ambient typical
Dimensions 19 " W x 22" D x 10.5" H
Shipping Weight 150 lbs.
PASS
Pass Laboratories
24449 Foresthill Rd
Foresthill CA 95631
www.passlabs.com
tel: (530) 367 3690
fax: (530) 367 2193