Filter
Top Products
10
INT-30A Owners Manual
Choose either XLR or RCA inputs. If you run both at once on a single
input from different components, the sound is not likely to be optimal, but
it shouldn’t cause damage anywhere.
Now that the source components and loudspeakers are connected into
the amplifier; plug the power cord back into the wall, and turn on the rear
power switch.
Push the front panel power button to activate the amplifier and turn the
volume control down (counter clock-wise). The front panel display should
now be illuminated.
The controls on the front of the Pass Labs integrated amplifier should be
intuitive. You should however understand that the volume control is always
active and over rides the mute control. Meaning that if at some point you
activate the mute control you can un-mute the amplifier by either pushing
the mute control a second time or by either advancing or retarding the
volume control knob.
The hand remote has some additional convenience features that the front
panel does not. Balance from the remote raises or lowers the speaker
volume levels relative to each other. Display provides a choice of normal
luminance, reduced luminance or display off. In the display “off” mode
the display will be normally dark, yet will provide reduced luminance
for several seconds any time a control function on either the remote or
integrated amplifier front panel are activated.
Please note: The hand remote is common to several Pass Labs products,
not all of the functions on this remote are applicable to your integrated
amplifier. Input 5, tape loop, pass through and external amp on are not
applicable to the INT-30A, integrated amplifier.
The hand remote has two (2) AAA batteries that can be replaced after the
back cover from the remote has been removed. These batteries will need
to be changed occasionally.
If you are not comfortable removing the rear cover of the remote and
changing batteries, have your dealer change them for you. Batteries may
explode if exposed to excessive heat, never leave your remote or any
battery powered device in direct sunlight or exposed to excessive heat
sources.
With any luck, you can now enter that blissful state of musical nirvana, and
we won’t expect you back for a while.
It’s always possible that something may go wrong. If so, don’t get excited.
We know It’s really aggravating when a product doesn’t work, but it will get
fixed, and often it’s something really simple.
You are ready to play music