Filter
Top Products
7
English
DeutschSvenskaDansk
Norsk
Fitting the kit's cable:
. The red wire of the kit's cable must be connected
to the constant 12V supply, the orange wire to the
ignition 12V and the black wire to earth.
. Check the wiring diagram of the car stereo's
ISO lead.
On some vehicles, the red and orange wires may
need to be reversed.
This can easily be done by reversing the two fuse
holders.
. Do not connect the orange wire to the constant
12V supply, as you could run down the vehicle's
battery.
Checking the installation:
.
If your 3200 LS-COLOR is correctly fitted, you
should see the message "Goodbye" on the screen
when you switch off your car's ignition.
Otherwise, the ignition 12V and the constant 12V
supply have been reversed. In this case, reverse the
two fuse holders on the kit's power supply lead