Filter
Top Products
21
Hi & Low Pass Crossover Slope
12 dB / Oct
DC Trigger Requirements
+9 Vdc to +12 Vdc, 2 mA
XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)
Dimensions
Width: 17-1/4” (437 mm)
Depth: 13-3/4” (350 mm)
Height, with feet: 4-1/8” (105 mm)
Height, without feet: 3-1/2” (89 mm)
Net Weight
14 lb. (6.3 kg)
Shipping Weight
21 lb. (9.5 kg)
Power Requirement
Standby: 0.5 Watts
Power On: 12 Watts
100-250 Volts, 50-60 Hz (Automatic)
Specifications
Frequency Response
10 Hz - 100 kHz, +0/-3 dB
Total Harmonic Distortion
< 0.01 %
Crosstalk
> 70 dB at 20 kHz
Input Sensitivity
300 mv: 1 Volt Out
Total Gain: 10 dB
Maximum Output: 7 Volts
Input Impedance
Unbalanced: 24k Ω
Balanced: 100k Ω per leg
Output Impedance
Unbalanced: 100 Ω
Balanced: 470 Ω per leg
S/N Ratio - Line Inputs 1- 5
> 108 dB, input shorted, IHF A-weighted
> 88 dB, input shorted, unweighted
S/N Ratio - DAC Inputs
> 108 dB, input shorted, IHF A-weighted
> 90 dB, input shorted, unweighted
S/N Ratio - Phono Inputs
MM > 80 dB, input shorted, IHF A-weighted
MM > 70 dB, input shorted, unweighted
MC > 67 dB, input shorted, IHF A-weighted
MC > 55 dB, input shorted, unweighted
Specifications and features subject to change or improvement without notice.
Copyright Parasound Product Inc., 2013
Rev. 1.1
www.parasound.com