Filter
Top Products
11
2. Connecting and Installing
You are now ready to connect and install the subwoofers. If you are color match painting do so now
before proceeding. Follow painting instructions provided earlier.
With grille removed and bracket attached to speaker, place subwoofer against wall or ceiling and …
Connecting Subwoofer:
Connect subwoofer cable as outlined in the Owners Manual included with your Paradigm
®
subwoofer amplifier
(sold separately)
. Once connected …
Installing Subwoofer:
a) Holding the subwoofer’s front lip with your thumbs and index fingers, push the mounting screws
toward each other with your other fingers, so the mounting brackets can fit through the hole with an
“up-and-in” motion. (Fig. 4b and 5b);
b) Release the screws and gently push the subwoofer into the wall/ceiling;
c)
In-Ceiling Models only:
Adjust the drive assembly so that it is aimed toward a corner of the room.
(inset, Fig. 5c);
d) Alternately tighten all screws until subwoofer is firmly installed. (Fig. 4c and Fig. 5c).
3. Installing the Grille
Press the grille into the groove on the front face of the speaker
(not shown)
.